Tree Work
Felling
This is where the tree is felled from ground level and where there are no structures or property that would be put at risk during this operation. This method of removal is both site and tree specific.
Dismantling
This is where the tree is dismantled in small sections, removing branches one by one and lowering them to the ground in a controlled manner, before moving onto the main trunk of the tree where again it is dismantled and lowered to the ground. This is a skilled operation and is usually undertaken using heavy duty rigging equipment, lowering ropes and accomplished branch removal techniques to protect surrounding plants and structures.
Crown Thinning
Crown thinning is the removal of a small portion of secondary and small live branches to produce a uniform density of foliage around an evenly spaced branch structure. This is usually confined to broad-leaved species. Crown thinning does not alter the overall size or shape of the tree, this method is most commonly used to allow more light to pass through the tree, reduce its wind resistance or to lessen the weight of heavy branches and improve the tree’s overall form.
Crown Lifting
Crown lifting is removal of the lowest branches and the preparation of lower branches for future removal, normally to give a uniform height from ground level. Good practice dictates that crown lifting should not normally include the removal of large branches growing directly from the trunk as this causes large wounds which may jeopardise the long term future of the tree. Common reasons for crown lifting are to bring more light and give access for traffic. In the U.K. common practice dictates clearance for vehicles is 5.2 metres (~17 feet), and for pedestrians 2.5m (~8 feet).
Crown Reduction
Crown reduction is used to reduce the height and/or spread of the crown of a tree by the removal of the ends of branches whilst maintaining the tree’s natural shape as far as is practicable. This method reduces the overall visual impact of the tree but allows the tree to remain and flourish.
Pollarding
Traditionally and still commonly used, this term describes the removal of all branches from the trunk. Mature trees that have not been pollarded before are generally not suitable candidates for this type of procedure due to the large wounds that such a treatment produces which may then jeopardise the long-term future of the tree. This term is also used when referring to regular (annual and biannual) pruning back of small branches to the same point, resulting in the formation of a ‘pollard head’. Pollarded trees usually require regular treatment for the re-growth.
Stump Grinding
We provide a stump grinding service which involves the complete removal of any size stump to a depth of approx 275 – 450mm (15-18inchs), allowing for replanting or turfing.